Miller Arrow 55 Uživatelský manuál

arrow55Fluid HeadOPERATOR’S MANUAL#1025 Arrow 40 Fluid Head#1028 Arrow 55 Fluid Headarrow40arrowFluid HeadOPERATOR’S MANUAL#1025 Arrow 40 Fluid Head#1

Illumination ButtonRetaining ScrewBatteryBattery DoorThe Arrow 40/55 Fluid Head offers high quality surface coatings, dust and moisture s

The Arrow 40/55 Fluid Head can be stored for extended periods; Miller recommends storage in a Miller Soft Case and the following:◗ Remove battery.◗

www.millertripods.comMILLER CAMERA SUPPORT EQUIPMENT30 Hotham Parade Artarmon, Sydney NSW 2064 AustraliaTel: +61 2 9439 6377 Fax: +61 2 9438 2819Ema

1Features and ControlsFig. 2Fig. 1Sliding Platform Camera Screws Camera PlateTilt LockTilt Drag Control Bubble Level Pan Drag ControlCounterbalance S

2Fig. 2Thank you for purchasing the Arrow 40/55 Fluid Head. The Arrow 40 Fluid Head has been designed to suit payload capacities from ENG to

3 Arrow 40 Arrow 55Weight - kg (lb) 3.2 (7.0) 3.2 (7.0)Payload Range - kg (lb) 7.0 – 16.0 (15.4 – 35.3) 10.0 – 25.0 (22.0 – 55.1)Max Capacity -

4

5The operating instructions are described in six steps. Please read and understand these instructions before using this equipment. Do not omit

2. Camera Set-up2.1 Remove the CAMERA PLATE by pulling down the SAFETY TAB while rotating the QUICK RELEASE KNOB to the left. The CAMERA PLA

3. Counterbalance ControlThe counterbalance system was designed to neutralise the effect of the camera weight when it is tilted. The Arrow 40/55 F

Operating Instructions4. Pan / Tilt Drag Control.The Arrow 40/55 Fluid Head offers 7 selectable positions of fluid drag + zero setting in the Pan and T