Miller Compass 15 Uživatelský manuál

Fluid HeadOPERATOR’S MANUAL#1034 Compass 15 Fluid Head compass15

Illumination ButtonRetaining ScrewBatteryBattery DoorThe Compass 15 Fluid Head offers high quality surface coatings. Miller recommends keeping the Fl

The Compass 15 Fluid Head can be stored for extended periods; Miller recommends storage in a Miller Soft Case and the following:• Remove battery.• C

www.millertripods.comMILLER CAMERA SUPPORT EQUIPMENT30 Hotham Parade Artarmon, Sydney NSW 2064 AustraliaTel: +61 2 9439 6377 Fax: +61 2 9438 2819Ema

1Features and ControlsFig. 1 Tilt LockPan Lock Threaded StudClamp NutSliding Platform Lock Pan Handle Clamp Pan Handle

2Fig. 11/4” + Pin Carriage Counterbalance Selector Bubble Level Pan Drag ControlFig. 2Features and ControlsSliding Camera PlateRelease KnobTilt

3Thank you for purchasing the Compass 15 Fluid Head. The Compass 15 Fluid Head has been designed to suit payload capacities from HDV

4Weight 2.5 kg (5.5 lb)Payload Range 2.0 – 9.0 kg (4.4 - 19.8 lb)Max. Capacity 20.0 kg (44.0 lb)Tilt Drag 5 Selectable uid drag positions + 0Tilt

5The operating instructions are described in six steps. Please read and understand these instructions before using this equipment. Do not omit any ste

2. Camera Set-up2.1 Remove the CAMERA PLATE by pressing the RELEASE KNOB while pulling the CAMERA PLATE out.2.2 Refer to the Camera’s owners man

3. Counterbalance ControlThe counterbalance system was designed to neutralise the effect of the camera weight when it is tilted. The Compass 15 Fluid

Operating Instructions4. Pan / Tilt Drag Control.The Compass 15 Fluid Head offers 5 selectable positions of uid drag + zero setting in the Pan and Ti